Mukmova Jumbo 7.5kW 3ph 415V - MM07/3

$10764.00 $7,569.00
Brand Davey
Model Jumbo Mukmova-MM07/3
Availability In Stock
General information

APPLICATION

Ideal for pumping water containing solids in suspension, such as effluent water, dairy or piggery waste, liquid food transfer, bentonite sludge and sawdust muds.

 

FEATURES & BENEFITS

MUKMOVA

• Semi vortex open vane impeller

• Solid cast iron casing and impeller

• Mechanical seal is grease packed with grease nipple

• Inspection cover held by two wing nuts

• Choice of 240 / 480 volt single phase and 415 volt three phase, 50Hz models

• Single phase models are capacitor start/capacitor run design

• Automatic resetting motor overload in all single phase models

• Oversized motor used, with ample power reserve

• Davey manufactured TEFC, IP56 motor

 

JUMBO MUKMOVA

• Robust cast iron casing with thick walls for longer pump life

• Open impeller design allows for high solids passage (up to 25x40mm) with little chance of blockage

• Internal armoured volute plate made of nodular cast iron to resist the abrasive and corrosive action of liquids even with solids in suspension

• The armoured volute plate is fixed to the casing without screws for fast and easy removal

• Self-priming action allows the pump to prime without the need to fill the pipe and to be operated without a foot value to reduce the risk of blockages

• Large priming and drain plugs for fast filling and draining of the pump casing

• Comes with companion flanges for easy installation of piping

 

Hydraulic Performance

curves

 

 

 DOCUMENTS

 
Spec & Features
  • Features and technical specification of the product. Please contact us for further information and specifics.
  • Model
    MM07/3
  • Type
    Jumbo Mukmova
  • KW (P2)
    7.5
  • Voltage
    415 v
  • Inlet
    2 inch F
  • Outlet
    2 inch F
  • phase
    3
  • Max. Flow
    800 Ipm
  • Max. Pressure
    350 kPa
  • Warranty
    2 years
Ask a question